Controller 4 QUICK RELEASE STICK

General Discussions
Post Reply
Juanjus
Posts: 30
Joined: Mon Oct 15, 2012 9:20 am

Fri Aug 07, 2020 8:17 pm

Please. Could you tell me how to replace the quick release stick?
frankMarini
Posts: 1
Joined: Tue Oct 20, 2020 1:49 am

Tue Oct 20, 2020 4:51 pm

The rotating wheel on the right shows how to close quickly to tighten the wheel on the fork / center. Note that it is basically 180 degrees. If fast release does not have a strong effect, or if the wheel is still loose, you need to adjust the speed discharge tension.

To do this, open the application to release the application. Now hold both ends (one on each side) and turn one hand at an hour until you feel the resistance when you close the lever 180. During this time, try to close the lever completely.

A horizontal display is appropriate for positive change when it can be closed to others. The best way to do this is to press it to close it in the palm of your hand. This allows you to place your finger on the back of the frame to help scrape the area to close it (it will be harder to leave a trace of the blade on your palm). If only one lever can be closed, open it, open the lever slightly and try again.

As soon as you get the brakes fast, make sure the wheels are put in and put into the fork (or center) and close quickly if you are ready to ride. The quick-release does not change automatically.
Chromosomal Analysis |
Event Staffing companies
Post Reply