nitro on ozone contact bar.

General Discussions
Post Reply
Damian
Posts: 56
Joined: Sat Oct 22, 2016 7:49 pm

Sat Nov 17, 2018 5:54 pm

Hi
I assume the answer will be yes but i want to double check before I spend $$.

Does Ozone 2018 Contact Water Control System work with Nitro 6. Pigtails, safety etc.

Thanks
Faxie
Posts: 685
Joined: Wed Aug 08, 2012 9:38 pm

Sat Nov 17, 2018 7:00 pm

Should be no problem. Powerlines have a knot and steeringlines a loop if I'm not mistaken.
Low V too.
Damian
Posts: 56
Joined: Sat Oct 22, 2016 7:49 pm

Sat Nov 17, 2018 7:54 pm

Perfect, thanks!
Damian
Posts: 56
Joined: Sat Oct 22, 2016 7:49 pm

Wed Nov 21, 2018 9:02 am

So the ozone bar has different attachments. Loop on the flying lines and aknot on the steering lines. I could get pigtails to make it work but I couldn't be bothered so I ended up buying 2018 Cabrinha 1x Trainline bar for a local shop.
Faxie
Posts: 685
Joined: Wed Aug 08, 2012 9:38 pm

Wed Nov 21, 2018 1:21 pm

Damian wrote:
Wed Nov 21, 2018 9:02 am
So the ozone bar has different attachments. Loop on the flying lines and aknot on the steering lines. I could get pigtails to make it work but I couldn't be bothered so I ended up buying 2018 Cabrinha 1x Trainline bar for a local shop.
I know they were like that, but I (mistakenly apparently) thought it was changed.

Ah well, Cab bar works too.
Bill C
Posts: 128
Joined: Mon Dec 21, 2015 3:37 pm

Thu Nov 29, 2018 12:53 pm

You can always buy a set of universal pigtails and reverse the loops/knots. I use the C4 bar, but one of my kites is a Naish that has opposite attachment points. I bought a set of universal pigtails and just leave them on the Naish kite.

Image
Post Reply