Back line knots on Element v4

General Discussions
Post Reply
Posts: 64
Joined: Sun Oct 12, 2014 9:34 pm

Thu Jun 02, 2016 11:31 pm

I just watched the video on the Element v5 three knot settings. Since I'm on Element v4's which of the two knots that come with it would be considered the "standard" calibration? The upper (closer to the kite), or lower?
Posts: 164
Joined: Sat Jan 31, 2015 10:04 am
Location: Australia

Fri Jun 03, 2016 3:16 am

This is strange as I just checked my 7m E4 & it has 3 knots not 2.

I have usually set mine on the middle (2nd knot) but do use the other knots depending on conditions.
Posts: 717
Joined: Wed Aug 08, 2012 9:38 pm

Fri Jun 03, 2016 1:16 pm

Well, I have had 2 sessions on my 9m V4 now, one on the middle knot, one on the upper knot. Didn't notice a real difference. The kite doesn't backstall on the highest knot on full power.
Posts: 124
Joined: Thu Feb 25, 2016 6:43 am
Location: Wellington/Porirua New Zealand

Fri Jun 03, 2016 6:19 pm

My E4 11m has 3 knots on both the red and blue tip leads. I don't get enough power typically on the outside knots but the middle and inside ones work well for me.
Posts: 623
Joined: Sun Jul 17, 2011 6:17 pm
Location: Wilmington NC

Sun Jun 05, 2016 11:58 am

Always rode on outside knots for surfing and mid knot for wake/freestyle. If you only have two knots tie another on the outside at equal lengths for more depower.
Post Reply